The Influence of Orthodontic Treatment on Periodontal Health between Challenge and Synergy: A Narrative Review.

By correctly repositioning teeth, orthodontic therapy improves both the function and appearance of an occlusion. The relationship between teeth and the tissues that surround and support them significantly influences these alterations. With ever more adults seeking orthodontic care, orthodontists are increasingly seeing patients with periodontal issues. Concerns about the patient's appearance, such as uneven gingival margins or functional issues caused by inflammatory periodontal diseases, should be accounted for when designing orthodontic treatment plans. Furthermore, orthodontics may increase the chances of saving and recovering a degraded dentition in cases of severe periodontitis. Today, general dentists, dontists, and orthodontists play integrative roles that enable them to achieve the best possible results for their patients. This review will improve the results of interdisciplinary treatments and increase cooperation between dental specialists by drawing attention to the essential connection between orthodontics and periodontics in regular clinical practice.

A Contemporary Review of Clinical Factors Involved in Speech-Perspectives from a Prosthodontist Point of View.

Background and Objectives: Learning to speak properly requires a fully formed brain, good eyesight, and a functioning auditory system. Defective phonation is the outcome of a failure in the development of any of the systems or components involved in speech production. Dentures with strong phonetic skills can be fabricated with the help of a dentist who has a firm grasp of speech production and phonetic characteristics. Every dentist strives to perfect their craft by perfecting the balance between the technical, cosmetic, and acoustic aspects of dentistry, or "phonetics". The ideal prosthesis for a patient is one that not only sounds good but also functions well mechanically and aesthetically. Words are spoken by using articulators that alter their size and form. Conclusions: Therefore, a prosthesis should be made in such a way that it does not interfere with the ability to communicate. As a result, a prosthodontist has to have a solid grasp of how speech is made and the numerous parts that go into it.

Analysis of Degradation Products of Biodegradable ZnMgY Alloy.

Biodegradable metallic materials are increasingly gaining ground in medical applications. Zn-based alloys show a degradation rate between those recorded for Mg-based materials with the fastest degradation rate and Fe-based materials with the slowest degradation rate. From the perspective of medical complications, it is essential to understand the size and nature of the degradation products developed from biodegradable materials, as well as the stage at which these residues are eliminated from the body. This paper presents investigations conducted on the corrosion/degradation products of an experimental material (ZnMgY alloy in cast and homogenized state) after immersion tests in three physiological solutions (Dulbecco's, Ringer's and simulated body fluid (SBF)). Scanning electron microscopy (SEM) was used to highlight the macroscopic and microscopic aspects of corrosion products and their effects on the surface. An X-ray energy dispersive detector (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) provided general information about the compounds based on their non-metallic character. The pH of the electrolyte solution was recorded for 72 h during immersion. The pH variation of the solution confirmed the main reactions proposed for the corrosion of ZnMg. The agglomerations of corrosion products were on the micrometer scale, mainly oxides, hydroxides and carbonates or phosphates. The corrosion effects on the surface were homogeneously spread, with a tendency to connect and form cracks or larger corrosion zones, transforming the pitting corrosion pattern into a generalized one. It was noticed that the alloy's microstructure strongly influences the corrosion characteristics.

Microstructural and Electrochemical Influence of Zn in MgCaZn Biodegradable Alloys.

In recent years, biodegradable materials have included magnesium alloys with homogenous disintegration and a controllable degradation rate. Utilized in medical applications, biodegradable materials based on magnesium have been widely explored throughout the years. It is well-known that alloying Mg with biocompatible and non-toxic elements increases the biodegradability of surgical alloys. The purpose of this study was to examine the microstructure and the electrochemical response (corrosion resistance) of a new experimental Mg-based biodegradable alloy-Mg-0.5%Ca with additions of Zn as follows: 0.5, 1.5, and 3.0 wt.% in order to control the corrosion rate. Immersion tests were performed for different periods in a simulated body fluid electrolyte solution at 37 °C, and the mass loss was appreciated in order to calculate the corrosion rate (CR). The investigation led to the discovery of a dendritic Mg solid solution, a lamellar Mg2Ca compound, and a MgZn2 intermetallic phase. Scanning electron microscopy, optical microscopy, and energy dispersive spectroscopy were used for surface analysis after the immersion and electro-corrosion resistance tests. The metallic and ceramic compounds that detached themselves from the sample and passed into the solution were evaluated using the SEM-EDS system. All samples presented a generalized electro-corrosion with anodic and cathodic reactions of similar intensity. The corrosion rate was similar regardless of the percentage of zinc, with a smaller value for a higher than 3 wt.% Zn percentage based on the more protective zinc oxide that appeared on the surface.

Perception of Remote Learning by Fixed Prosthodontic Students at a Romanian Faculty of Dentistry.

The COVID-19 pandemic has forced the transfer of traditional on-site educational activities to the online environment. This study aimed to evaluate the perception and acceptance of remote learning among fixed prosthodontic students attending the Faculty of Dental Medicine of "Grigore T. Popa" University of Medicine and Pharmacy in Iasi, Romania, and to analyze the feedback regarding their experience with the new online methods, the perceived quality thereof and suggestions for improvement. An observational cross-sectional, online study based on 22 questions was conducted with 259 students. The general opinion of online education was good or very good (40.15%); regarding its efficiency, 28.57% found it efficient while 34.36% found it inefficient or very inefficient; regarding the pleasure of learning online, 45.95% of students enjoyed online learning, while 36.64% did not enjoy it. The problem that was most cited by respondents was that of keeping all students motivated and involved (65.6%). Sixty-two percent of the respondents believe that online dental education should not exist, or just to a small extent, a result justified by the practical nature of the profession. The general opinion was that health risks should be managed and mitigated by using a hybrid system that would allow students to do on-site clinical training with direct contact with patients.

In-Vitro Analysis of FeMn-Si Smart Biodegradable Alloy.

Special materials are required in many applications to fulfill specific medical or industrial necessities. Biodegradable metallic materials present many attractive properties, especially mechanical ones correlated with good biocompatibility with vivant bodies. A biodegradable iron-based material was realized through electric arc-melting and induction furnace homogenization. The new chemical composition obtained presented a special property named SME (shape memory effect) based on the martensite transformation. Preliminary results about this special biodegradable material with a new chemical composition were realized for the chemical composition and structural and thermal characterization. Corrosion resistance was evaluated in Ringer's solution through immersion tests for 1, 3, and 7 days, the solution pH was measured in time for 3 days with values for each minute, and electro-corrosion was measured using a potentiostat and a three electrode cell. The mass loss of the samples during immersion and electro-corrosion was evaluated and the surface condition was studied by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). SME was highlighted with differential scanning calorimetry (DSC). The results confirm the possibility of a memory effect of the materials in the wrought case and a generalized corrosion (Tafel and cyclic potentiometry and EIS) with the formation of iron oxides and a corrosion rate favorable for applications that require a longer implantation period.

Microbiologic Profiles of Patients with Dental Prosthetic Treatment and Periodontitis before and after Photoactivation Therapy-Randomized Clinical Trial.

Fixed prosthodontic dental restorations can potentially affect the periodontal tissues and vice versa, the periodontium can influence the longevity and esthetic appearance of dental restorations. We proposed an investigation on total bacterial load, specific periodontal pathogens, and periodontal clinical parameters in patients with dental fixed prosthesis and different degrees of periodontal tissue loss that followed photoactivation therapy (PDT) adjunctive to scaling and root planing. The study was conducted on 160 subjects, which were randomly assigned to scaling and root planing (SRP) alone (52 subjects, 256 sites), SRP and chlorhexidine rinsing (58 subjects, 276 sites), and SRP plus PDT (50 subjects, 318 sites). Periodontal parameters (plaque index, bleeding on probing, probing depth, and clinical attachment loss), followed by total bacterial load and specific periodontal pathogens (Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, and Treponema denticola) were examined in each patient at baseline, one and six months after. PDT exerted significant improvements both in clinical and microbiological load after one month, and these results were maintained 6 months after when compared to chlorhexidine rinsing or SRP alone, especially in severe periodontitis cases. Photoactivation therapy as an adjunctive periodontal therapeutic method was efficient in offering supplementary periodontal improvements in the clinical and microbiological parameters of patients with fixed dental prosthesis, particularly in severe periodontitis cases.

Study on the Effects of Melatonin on Glycemic Control and Periodontal Parameters in Patients with Type II Diabetes Mellitus and Periodontal Disease.

Background and Objectives: There is evidence that melatonin could improve the periodontal status and also glycemic control of patients with diabetes mellitus. Therefore, the aim of this study was to assess the effects of scaling and root planing plus adjunctive systemic treatment with melatonin on periodontal parameters and glycemic control in patients with type 2 diabetes and chronic periodontitis. Materials and Methods: The study was conducted on 54 subjects with periodontitis and diabetes mellitus randomly assigned to the study group (n = 27, subjects with scaling and root planing + melatonin) or control group (n = 27, subjects with scaling and root planing + placebo). Periodontal parameters (probing depth-PD; clinical attachment loss-CAL; bleeding on probing-BOP; and hygiene level) and glycated hemoglobin (HbA1c) were assessed at baseline and 8 weeks after. Results: At baseline, there were no significant differences between groups, but at the second evaluation 8 weeks later the association of melatonin with the non-surgical periodontal therapy exerted statistically significant improvements, both in periodontal parameters, with a significant decrease in periodontal disease severity, and glycated hemoglobin when compared to the control subjects. Conclusions: In our study, combined non-surgical periodontal treatment and systemic treatment with melatonin provided additional improvements to severe periodontal condition and the glycemic control of patients with diabetes type 2 when compared to non-surgical periodontal treatment alone.